We can be divided into two types based on the hardness, specific gravity, and other characteristics of mineral materials, namely heavy vertical multi-stage coarse powder machines and light vertical multi-stage coarse powder machines, according to their internal structures. Among them, heavy vertical multi-stage coarse powder machines are the ideal equipment for professional grinding of high hardness ores such as river pebbles, granite, basalt, iron ore, and silica.

Performance characteristics

1. The material is not affected by moisture and does not block the machine;

2. Adjustable speed, controllable proportion of finished product fineness;

3. Large single machine output, high yield, and less powder under the 120 mesh sieve;

4. The feed particle size limit is small, and both small and large materials can be processed;

5. Closed operation, equipped with dust collection equipment, environmentally friendly and good;

6. Moderate price, low power consumption, and low usage cost;

Technical Parameter

The above technical parameters are for reference only. If there are any changes, no further notice will be given. Our company's current new technical parameters shall prevail! According to different raw materials and finished product particle sizes, there may be slight differences in production. The feed particle size can reach 10-15 cm, but it is recommended to control the ideal feed particle size below 3-5 cm and support customization according to needs!

operational principle

The material passes through some feeders on the machine and evenly falls into the high-speed rotating machine cavity. Under the high-speed impact and centrifugal force of the grinding block, the material is thrown out at high speed and collides and grinds with the surrounding lining plate. After hitting and colliding with each other, the material will collide and rub with each other multiple times between the grinding block and the lining plate through the eddy current formed by the material, resulting in crushing. It undergoes four identical operations from top to bottom, and finally is discharged directly from the bottom, Forming a closed circuit with multiple cycles, the finished product is controlled by the speed and screening equipment, and the particle size required by the user is transported to the finished product area.

Our vertical multi-stage coarse powder machine is different from the horizontal European coarse powder machine. Its discharge particle size is controllable and adjustable, and the proportion of fine powder under the 120 mesh sieve is relatively small. The proportion can be flexibly controlled according to user requirements!

The vertical multi-stage coarse powder machine mainly processes finished product particle size ranges: 10-20 mesh, 20-40 mesh, 30-70 mesh, 40-80 mesh, 70-120 mesh, 80-140 mesh, etc. Among them, the proportion between 30-70 mesh and 70-120 mesh is balanced!

This machine mainly solves the shortcomings of the horizontal European version coarse powder machine, which processes products that are too fine and has a lot of material under the 120 mesh sieve!

    Applications: Secondary medium & fine crusher in mining, quarry, mixing and batching plant, road and building construction, highway, railway and subway, and water conservancy.

Overview

    We can design the primary crushing,secondary crushing,tertiary crushing and combine them with each other flexibly according to customers' requirement.We will try our best to meet our customers'requirement.

Learn More Combination Mobile Crusher

1.Equipments integration
2.High maneuverability
3.Saving transportation cost of raw material
4.Flexible configuration
5.Independent power generation system
6.Reliable quality and stable performance

Device Configuration

Feeder: 3896 type, 2.2KW × 2 sets;

Crusher: Heavy hammer crusher 1210; 110KW × 2 sets;

Circular vibrating screen: 4YK1860; 22KW;

Belt conveyor: Types 800 and 650;

Mobile vehicle system;

    It can crush materials of different sizes into small particles of relatively equal sizes.

    The crushing machine has the characteristics of reliable performance, stable operation, low energy consumption, and high efficiency, etc.

    It is mainly used in the cement industry, coal separation process, electricity generation, construction industry, and other fields.

   Technical Parameters of Common Hammer Crusher:

Features of Hammer Crusher:

Hammer crusher has compact structure and reasonable layout.
It is convenient to install, and easy to operate and maintain.
It can crush large, medium and small sized stones, and has high reduction ratio.
The crushing machine is quite suitable for use in cement plants.

Categories:

    Hammer crushers can be divided into common hammer crusher and ring hammer crusher. Ring hammer crusher is widely used to crush coal and coke. Common hammer crusher always uses prefix PC, while ring hammer crusher uses prefix PCH.

Technical Parameters of Common Hammer Crusher:

Features

1、High heat transfer coefficient and high thermal efficiency
2、Large treatment capability, wide application
3、Well drying effect
4、Indirect-heating, no material contamination
5、Retention time can be adjusted, low energy consumption
6、Convenient operation and easy maintenance

Features

1. Simple structure, stable performance. Long service life of the bearings.
2. Little loss for medium-sized or fine sand and stone powder.
3. Parts constructed for durability. Easy maintenance.
4. Longer working life, applicable to multiple working environments.

    It has the characteristics of high reduction ratio, low power consumption, stable performance and easy maintenance, etc.

Technical parameter of Composite Crusher:

Note:This is just reference,if you want to know more please contact us to get offer and process.

For different ore, choose different internal structure, we provide customized service!

(Above：Mobile multi-stage linkage roller screen)

Technical Parameter：

Our Tsingshan Technology Company can customize products according to the needs of users.

Working principle:

The optimized crushing chamber improves fine crushing effects and enhances the unitarily of spare parts. The hammer is designed with tungsten and titanium alloy integrated structure and other special wear-resistant materials which greatly lengthen the service life of hammerhead. It is a high-tech product for which we have full intellectual property rights. QINGSHAN  owns the technology, in terms of clinker crushing in particular, which is way ahead of our fellow competitors.

Advantage
1. Feeding size:120mm-200mm;
2. More than 85% of products below 3mm;
3. Even particle size, higher output, more durable plate hammer;
4. Lower motor power. No need the thirdly crushing;
5. Simple structure, easy maintenance and stable running.

    Applications: Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics.

Overview

    The ball mill is a key equipment to grind the crushed materials, and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc, and the ball mill can grind various ores and other materials with dry type and wet type. There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material.

Working Principle

    The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.

Specifications - Technical Data